Helps to power up H8dme-ex-ls006

We are ready for the power up of the motherboard.

… But the traditional methods, the pins “power on” does not work.

Do not worry, connecting “NMI” pins, and motherboard power up.

If you are lucky, on the display screen you see boot logo. If not, only fan and black screen.

Why?

Maybe it’s a one or more RAM DIMM  dead. Just place one dimm and start motherboard. It’s ok? Move the dimms, until found the wrong one 🙂

After booting press del key to acces BIOS, and change the boot order with CD in first and USB after. Take an IP address IPMI, save and reboot.

Connecting with supermicro software IPMI view FTP link with ip adress gived before. User / pass is ADMIN / ADMIN.

In virtual devise plug iso of ESXi and connect it.

Look the screen tab, is your screen report, navigate it, and install ESXi.

My English has not improved…

Advertisements
This entry was posted in H8DME-EX-LS006, VMware and tagged , , . Bookmark the permalink.

19 Responses to Helps to power up H8dme-ex-ls006

  1. slacker365 says:

    Did you have any issues with finding a power supply?

  2. rochegregory says:

    No, is power supply for server or standard computer and adaptator.

  3. Craig says:

    Can u make a video on how to power this on?

  4. rochegregory says:

    Video for connecting 2 pins ????

  5. vguy says:

    We’re you able to get the on-board sata devices to pass through? How about the infiniband were you able to get the on-board infiniband adadapters to work, or did they not work so you bought the HP cards?

  6. craig says:

    I figured out how to turn on. The pins do not work the same as a desktop. I have a very nice server set up with dual 6 way opterons and 16 gb of ram with 2 250gb hdds in raid 1. All for under $150 usd. I am running 3 gaming servers on it and cpu utilization barely hits 5%.

  7. YFL says:

    The board has IPMI build-in? or with add-on card?
    thanks.

  8. miket says:

    Your blog has been very helpful. Thank you. i am having problems installing any linux os. Any suggestions?

    Thank you.

    MT

  9. miket80 says:

    i am having a terrible time loading linux (Suse 9.3, ubuntu 12.04, 13.10, 14.04, 32 or 64bit). The system crashes/hangs from the get go. I would appreciate any assistance.

  10. Tyler says:

    Hello,
    I just bought this same motherboard, and am having many problems getting it to power on. Where are the ‘NMI’ pins, and how did you get it to power on?
    Thank you very much for your time,
    Tyler Heldreth

  11. rochegregory says:

    Connect pin 1 to pin 2 just pulsation ! To power on motherboard.

  12. Nyak says:

    Hi! I found one of these boards in a server system with two Opteron 8439 SE’s and 64GB of RAM. How much can I sell all of this for? Thanks!

    • rochegregory says:

      If the motherboard power up.

      -1 motherboard ~€45
      -2 CPU and Heatsink ~ €150
      -64GB ddr2 to be seen with speed / ecc/ reg and size of every bar ~ €80 has €100

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s